Nyheter

På denne side vil vi presentere nyheter om firmaet, så i fra tid til annen er det bra å se her etter nyheter på produkt siden. Nyhetene på denne side vil bli på engelsk.

New series of Label Unwinders for SATO CG2 & TH2 Printers.

Nasab has made a new series of Label Unwinder units UW-2S which will fit printer TH2 and CG2 from SATO. The Label Unwinder UW-2S-SK is a special version which can be fitted with a special Tax Declaration box and LAN adapter together with the TH2 printer from Sato.







    Picture shows UW2S adapted to fit TH2               SK Version of UW2S
                and CG2 Printer from Sato.                     for TH2 printer from Sato

Info Label Unwinder UW-2S-CG2 Printer

Info Label Unwinder UW-2S-TH2 Printer

Info Label Unwinder UW-2S-TH2 Printer, SK Version

New series of Label Rewinders for Intermec and SATO Printers.

Nasab has made a new series of Label Rewinder units which the customer can order with special adapters for printers from Intermec and SATO. The Label Rewinders can be ordered true separate Art. Nr. for each printer. The New Label Rewinder series have electronic start/stop and are easy-to-integrate with different Printers and easy to adjust.







Picture shows RW4S adapted to fit PX5i Printer.

New version of Low Cost Label Dispenser for Intermec and SATO Printers

The new Low Cost Label Dispenser are ideal for small and mid-size production lines where you want to use the printer to label the product "On Line", in a conveyer. This is an alternative to more expensive solutions where you do not need to label the product with the last label coming out from the printer. In many cases you are printing labels with the same information on every label, ex. bakery labeling bread. The new version of Low Cost Label Dispenser are adapted to be used with CL and CG4 Printer from SATO and PX5i and F4i Printer from Intermec. The Label Dispenser are fitted with external "Back Paper" Rewinder in the back with start/stop electronic and a 50mm clamp under the unit for easy installation as standard.









Picture shows D4-CL with SATO CL Printer.

Top Stories

  • February 2011
    New Product Range of Rewinders B-models for CL408 & M84Pro:
    New range of products presented for the printers from SATO. (CL408 and M84Pro)
  • January 2011
    New Product Range of Unwinders, Rewinders & Un/Rewinders for CG2 & CG4:
    New range of products presented for the new generation of printers from SATO. (CG2 and CG4)
  • Mars 2010
    New Product Range of Unwinders, Rewinders & Un/Rewinders for CT, CL & GL series:
    New range of products presented for the new generation of printers from SATO. (CTx, CLx & GLx)

CG2 & CG4

Unwinder(UW)
New model for SATO Printer CG2 and CG4 was introduced under January 2011. The new models can take label width 50mm and 135mm, label roll diameter 260mm or 360mm.

       

Rewinders(RW)
New model for SATO Printer CG2 and CG4 was introduced under January 2011. The new models can take label width 50mm and 135mm, label roll diameter 210mm or 360mm.

  

Rewinders(RW-B model)
New RW-B models for SATO Printer CL408 and M84Pro was introduced under February 2011. The new RW-B models are to be connected in the back of the printer and rewinding the back paper when the printer are used with a dispenser unit in the front. Start and Stop and Power of the Rewinder are handled from the 14 pin connector in the back of the printer, no need for Tension Arm or External Power Supply. Easy installation, no screws.

     

Un/Rewinder(URW, URW-B model)
New model for SATO Printer CG2 and CG4 was introduced under January-February 2011. The new models can take label width 50mm and 135mm, label roll diameter 260/210mm or 360/360mm.